IEI Integration IOWA-LX-600 - Manual (Page 67)

IOWA-LX-600 Half-size CPU Card
Page 53
4.8 Internal Peripheral Device Connections
This section outlines the installation of peripheral devices to the onboard connectors
4.8.1 5.1 Channel Audio Kit Installation
The audio kit attaches to the audio connector. The audio kit provides 5.1 channel audio.
To install the audio kit, please refer to the steps below:
Step 1: Connect the cable to the audio kit. Connect the included cable to the audio kit.
Make sure pin 1 aligns with the marked pin.
Step 2: Conect the cable to the board. Connect the other end of the cable to the board.
Make sure to line up the marked pin 1.
Figure 4-9: 5.1 Channel Audio Kit
Step 3: Mount the audio kit onto the chassis. Once the audio kit is connected to the
board, secure the audio kit bracket to the system chassis.
Step 4: Connect the audio devices. Connect speakers and external audio sources to
the audio jacks on the audio kit.
Step 5: Install the driver. Install the 5.1 channel audio driver included with the board.
S te p 0 :