IEI Integration IOWA-LX-600 - Manual (Page 121)

IOWA-LX-600 Half-size CPU Card
Page 107
B.1 One Key Recovery Introduction
The IEI one key recovery is an easy-to-use front end for the Norton Ghost system backup
and recovery tool. The one key recovery provides quick and easy shortcuts for creating a
backup and reverting to that backup or for reverting to the factory default settings.
The IEI One Key Recovery tool menu is shown below.
Figure B-1: IEI One Key Recovery Tool Menu
Prior to using the IEI One Key Recovery tool (as shown in
777
Figure B-1) to backup or
restore Windows system, five setup procedures are required.
3. Hardware and BIOS setup (see Section
777
B.2.1)
4. Create partitions (see Section
777
B.2.2)
5. Install operating system, drivers and system applications (see Section
777
B.2.3)
6. Build-up recovery partition (see Section
777
B.2.4)
7. Create factory default image (see Section
777
B.2.5)
After completing the five initial setup procedures as described above, users can access
the recovery tool by pressing <F3> while booting up the system. The detailed information
of each function is described in Section
777
B.4.
NOTE:
The initial setup procedures for Linux system are described in
Section
777
B.3.