IEI Integration IOWA-LX-600 - Manual (Page 112)

IOWA-LX-600 Half-size CPU Card
Page 98
Disabled (Default) ESCD will not be reconfigured
Enabled ESCD will be reconfigured after you exit setup
Resources Controlled By [Auto (ESCD)]
Use the Resources Controlled By option to either manually configure all the boot and
plug and play devices, or allow BIOS to configure these devices automatically. If BIOS is
allowed to configure the devices automatically IRQs, DMA and memory base address
fields cannot be set manually.
Auto(ESCD) (Default) BIOS automatically configures plug and play devices as
well as boot devices.
Manual Manually configure the plug and play devices and any
other boot devices.
IRQ Resources [Press Enter]
The IRQ Resources option can only be selected if the Resources Controlled By option
is set to Manual.
The IRQ Resources menu has the following options:
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
The above options all have the following default options.
PCI/ISA PnP (Default) The IRQ is reserved by BIOS for PCI and ISA PnP
devices.
Legacy ISA The IRQ is assigned to legacy ISA for devices compliant
with the original PC AT bus specification, PCI/ISA PNP for
devices compliant with the Plug and Play standard