5 parallel port cable without bracket – IEI Integration PICOe-GM45A User Manual
Page 101
PICOe-GM45A Half-Size CPU Card
Page 101
Figure 5-14: Dual USB Cable Connection
Step 4:
Attach the bracket to the chassis. The USB 2.0 connectors are attached to a
bracket. To secure the bracket to the chassis please refer to the installation
instructions that came with the chassis.
Step 0:
5.7.5 Parallel Port Cable without Bracket
The optional parallel port (LPT) cable respectively connects the on-board LPT 26-pin box
header to an external LPT device (like a printer). The cable comprises a 26-pin female
header, to be connected to the on-board LPT box-header, on one side and on the other
side a standard external LPT connector. To connect the LPT cable, please follow the
steps below.
Step 1:
Locate the connector. The LPT connector location is shown in Chapter 4.