4 vga monitor connection – IEI Integration PICOe-GM45A User Manual
Page 107
PICOe-GM45A Half-Size CPU Card
Page 107
Series "A" receptacle connectors are shown in Chapter 3.
Step 2:
Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into
the USB Series "A" receptacle on the external peripheral interface. See
862H821H
Figure
5-20.
Step 0:
Figure 5-20: USB Connector
5.8.4 VGA Monitor Connection
The PICOe-GM45A has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the PICOe-GM45A, please follow the instructions below.
Step 1:
Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2:
Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3:
Insert the VGA connector. Once the connectors are properly aligned with the