IEI Integration PICOe-GM45A - Manual (Page 103)

PICOe-GM45A Half-Size CPU Card
Page 103
Figure 5-16: Connect the LPT Device
5.7.6 Dual RS-232 Cable with Slot Bracket
The dual RS-232 cable slot connector consists of two connectors attached to two
independent cables. Each cable is then attached to a D-sub 9 male connector that is
mounted onto a slot. To install the dual RS-232 cable, please follow the steps below.
Step 1: Locate the connectors. The locations of the RS-232 connectors are shown in
Chapter 3.
Step 2: Insert the cable connectors. Insert one connector into each serial port box
headers. See
818H
Figure 5-17. A key on the front of the cable connectors ensures
the connector can only be installed in one direction.