IEI Integration PICOe-GM45A - Manual (Page 104)

PICOe-GM45A Half-Size CPU Card
Page 104
Figure 5-17: Dual RS-232 Cable Installation
Step 3: Secure the bracket. The dual RS-232 connector has two D-sub 9 male
connectors secured on a bracket. To secure the bracket to the chassis please
refer to the reference material that came with the chassis Step 0:
5.8 External Peripheral Interface Connection
The following external peripheral devices can be connected to the external peripheral
interface connectors.
RJ-45 Ethernet cable connectors
PS/2 devices
USB devices
VGA monitors
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding PICOe-GM45A external peripheral interface connector
making sure the pins are properly aligned.