IEI Integration PICOe-GM45A - Manual (Page 85)

PICOe-GM45A Half-Size CPU Card
Page 85
Step 5: Align the CPU pins. Carefully align the CPU pins with the holes in the CPU
socket.
Step 6: Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are
properly aligned, the CPU should slide into the CPU socket smoothly.
Step 7: Lock the retention screw. Rotate the retention screw into the locked position.
See
783H
Figure 5-2. Step 0:
Figure 5-2: Lock the CPU Socket Retention Screw
5.4.2 Socket P Cooling Kit Installation
An IEI Socket P CPU cooling kit can be purchased separately. (See Chapter 3) The
cooling kit comprises a CPU heat sink and a cooling fan.
WARNING:
Do not wipe off (accidentally or otherwise) the pre-sprayed layer of
thermal paste on the bottom of the [Fan model#] heat sink. The thermal