IEI Integration IEM-LX v1.10 - Manual (Page 56)

IEM-LX-800 ETX CPU Module
Page 40
out and push the rear of the SO-DIMM down. (See Figure 5-1)
Step 5: Secure the SO-DIMM. Release the arms on the SO-DIMM socket. They clip into
place and secure the SO-DIMM in the socket. Step 0:
5.3.2 Mounting the IEM-LX Embedded Module
The IEM-LX embedded module has four standard ETX connectors on the reverse side.
Align these ETX connectors (ETX-X1, ETX-X2, ETX-X3 and ETX-X4) with the
corresponding connectors on a compatible baseboard. Gently push the embedded
module down to ensure the connectors are properly connected.
Baseboard can be designed by the end user, customized by IEI, or purchased from IEI.
For more information visit the IEI webstie ( www.ieiworld.com ) or contact an IEI sales
representative.