IEI Integration IEM-LX v1.10 - Manual (Page 79)

IEM-LX-800 ETX CPU Module
Page 63
Refresh Rate [60Hz]
Use the Refresh Rate option to set the screen refresh rate required by the panel
connected to the system. Check the documentation that came with the panel before
setting this option. Configuration options are listed below.
60Hz (Default)
70Hz
72Hz
75Hz
85Hz
90Hz
100Hz
HSYNC Polarity [Low]
Use the HSYNC Polarity option to set the polarity of the HSYNC signal to the panel.
Configuration options are listed below.
High
Low (Default)
VSYNC Polarity Active [Low]
Use the VGSYNC Polarity Active option to set the polarity of the VSYNC signal to the
panel. Configuration options are listed below.
High
Low (Default)
SHFCLK Active Period [Free Running]
Use the SHFCLK Active Period option to set the SHFCLK. Configuration options are
listed below.
Active Only
Free running (Default)