IEI Integration IEM-LX v1.10 - Manual (Page 85)

IEM-LX-800 ETX CPU Module
Page 69
Hi, Hi
Hi, Lo (Default)
Lo, Hi
Lo, Lo
IR Transmission Delay [Enabled]
Use the IR Transmission Delay option to enable or disable IR transmission delays.
Disabled IR transmission are not delayed
Enabled (Default) IR transmission are delayed
UR2 Duplex Mode [Half]
Use the UR2 Duplex Mode option to specify the transmission mode for the IR port device.
Full Simultaneous bi-directional transmission occurs
Half (Default) Transmission only occurs in one direction at a time
Use IR Pins [IR-Rx2Tx2]
Use the Use IR Pins options to specify how the IR pins respond. The configuration options
are below.
RxD2, TxD2
IR-Rx2, Tx2 (Default)
Onboard Parallel Port [378/IRQ7]
Use the Onboard Parallel Port option to specify a logical LPT port address and
corresponding interrupt for the physical parallel port. The configuration options are listed
below.
Disabled
378/IRQ7 (Default)
278/IRQ5