IEI Integration IMBA-G412ISA v1.00 - Manual (Page 104)

2010/10/262010/10/26
IMBA-G412ISA ATX Motherboard
Page 91
BYOSOFT BIOS Setup Utility
Power Management Features
Power Supply Mode
<BY HARDWARE>
Power Supply Status [ATX POWER]
ACPI Suspend Type <S3>
Restore On AC Power loss <Power off>
> APM Configuration
Item
Help
___________________
This option decides
whether the system
BIOS the Power
Management
features. When
jumper setting is AT
mode, BIOS can not
set the power supply
mode as ATX mode.
↑ ↓=Move Highlight <Enter>=Select Entry F10=Save Esc=Exit Without Save
F1=Scroll Help F9=Reset to Defaults
BIOS Menu 13: Power Management Features
Power Supply Mode [BY HARDWARE]
Use the Power Supply Mode BIOS option to select the power mode for the system.
AT Power Use AT power mode
ATX Power Use ATX power mode
BY
HARDWARE
D EFAULT The power mode is selected by the on-board jumper.
ACPI Suspend Type [S3]
Use the ACPI Suspend Type BIOS option to specify the sleep state the system enters
when not being used.
S1 System appears off. The CPU is stopped; RAM is
refreshed; the system is running in a low power mode.
S3 D EFAULT System appears off. The CPU has no power; RAM is in
slow refresh; the power supply is in a reduced power
mode.