C.4 recovery tool functions – IEI Integration IMBA-G412ISA v1.00 User Manual
Page 140
Advertising
2010/10/262010/10/26
IMBA-G412ISA ATX Motherboard
Page 127
Step 7:
The recovery tool menu appears. (
788H788H788H
Figure C-25)
Figure C-25: Recovery Tool Menu
Step 8:
Create a factory default image. Follow
Step 2
~
Step 12
described
in Section
789H789H789H
C.2.5 to create a factory default image.
C.4 Recovery Tool Functions
After completing the initial setup procedures as described above, users can access the
recovery tool by pressing <F3> while booting up the system. The main menu of the
recovery tool is shown below.
Advertising