IEI Integration IMBA-G412ISA v1.00 - Manual (Page 74)

2010/10/262010/10/26
IMBA-G412ISA ATX Motherboard
Page 61
Figure 4-19: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector. Step 0:
4.6.4 Parallel Device Connection
The IMBA-G412ISA has a single female DB-25 connector on the external peripheral
interface panel for parallel devices. Follow the steps below to connect a parallel device to
the IMBA-G412ISA.
Step 1: Locate the DB-25 connector. The location of the DB-25 connector is shown in
Chapter 3.
Step 2: Insert the DB-25 connector. Insert the DB-25 connector of a parallel device
into the DB-25 connector on the external peripheral interface. See
676H676H676H
Figure 4-20.