IEI Integration IMBA-G412ISA v1.00 - Manual (Page 125)

11210/26/2010158
Page 112
IMBA-G412ISA ATX Motherboard
NOTE:
Installing unsupported OS versions may cause the recovery tool to fail.
C.2 Setup Procedure for Windows
Prior to using the recovery tool to backup or restore Windows system, a few setup
procedures are required.
Step 1: Hardware and BIOS setup (see Section
769H769H769H
C.2.1)
Step 2: Create partitions (see Section
770H770H770H
C.2.2)
Step 3: Install operating system, drivers and system applications (see Section
771H771H771H
C.2.3)
Step 4: Build-up recovery partition (see Section
772H772H772H
C.2.4)
Step 5: Create factory default image (see Section
773H773H773H
C.2.5) S te p 0 :
The detailed descriptions are described in the following sections.
NOTE:
The setup procedures described below are for Microsoft Windows
operating system users. For Linux system, most setup procedures are
the same with Microsoft Windows except for several steps which is
described in Section
774H774H774H
C.3.
C.2.1 Hardware and BIOS Setup
Step 1: Make sure the system is powered off and unplugged.
Step 2: Install a hard drive or SSD in the system. An unformatted and unpartitioned disk
is recommended.
Step 3: Connect an optical disk drive to the system and insert the recovery CD.