IEI Integration IMBA-G412ISA v1.00 - Manual (Page 66)

2010/10/262010/10/26
IMBA-G412ISA ATX Motherboard
Page 53
4.4.4 CompactFlash® Setup
Jumper Label: JP2
Jumper Type: 2-pin header
Jumper Settings: See
664H664H664H
Table 4-5
Jumper Location: See
665H665H665H
Figure 4-11
The CompactFlash® slot is connected through an IDE connection. This jumper sets the
CompactFlash® card as the master or slave IDE device.
Setting Description
Short Master (Default)
Open Slave
Table 4-5: CompactFlash® Setup Jumper Settings
Figure 4-11: CompactFlash® Setup Jumper Location
4.4.5 CF Voltage Select Jumper
Jumper Label: J_CF1
Jumper Type: 3-pin header
Jumper Settings: See
666H666H666H
Table 4-6
Jumper Location: See
667H667H667H
Figure 4-12
The CF voltage select jumper sets the voltage of the CompactFlash® slot.