IEI Integration NANO-LX v1.10 - Manual (Page 142)

NANO-LX EPIC SBC
x IR Transmission Delay [Enabled]
Use the IR Transmission Delay option to enable or disable IR transmission delays.
Disabled IR transmission are not delayed.
Enabled (Default) IR transmission are delayed.
x UR2 Duplex Mode [Half]
Use the UR2 Duplex Mode option to specify the transmission mode for the IR port device.
Full Simultaneous bi-directional transmission occurs.
Half (Default) Transmission only occurs in one direction at a time.
x Use IR Pins [IR-Rx2Tx2]
Use the Use IR Pins options to specify how the IR pins respond. The Use IR Pins options
are:
RxD2,TxD2
IR-Rx2Tx2 (Default)
Onboard Parallel Port [378/IRQ7]
Use the Onboard Parallel Port option to specify a logical LPT port address and
corresponding interrupt for the physical parallel port. The Onboard Parallel Port options
are:
Disabled
378/IRQ7 (Default)
278/IRQ5
3BC/IRQ7
Parallel Port Mode [SPP]
Use the Parallel Port Mode option to select parallel port operation mode.
Page 142