IEI Integration NANO-LX v1.10 - Manual (Page 56)

NANO-LX EPIC SBC
WARNING!
1. Keep batteries away from children.
2. There is a danger of explosion if the battery is incorrectly replaced.
3. Only a certified module from IEI can be used as a replacement.
4. Do not expose the battery to excessive heat or fire.
5. If the battery shows signs of leakage, contact a local vendor or IEI immediately.
PIN DESCRIPTION PIN DESCRIPTION
1 BAT+ 2 GND
Table 4-8: BT1 Connector Pinouts
Figure 4-7: BT1 Connector Location
4.2.6 Compact Flash Connector
CN Label: CN35
CN Type: 50-pin header (2x25 pins)
CN Pinouts: See Table 4-9
CN Location: See Figure 4-8
The Compact Flash connector is used to adapt Type II Compact Flash and CF+ cards for
use in Type II (5 mm thick) PCMCIA card slots.
Page 56