IEI Integration NANO-LX v1.10 - Manual (Page 146)

NANO-LX EPIC SBC
When the system is in the [S1(POS)] suspend state, the system appears off. The CPU is
stopped, RAM is refreshed AND the system is runs in a low power mode. The ACPI
Suspend Type option is not user configurable.
Power Management [APM]
Use the Power Management option to set the power management type used by the
system.
Disabled All power management options are turned off. The only
user configurable options are the power button and
alarm settings.
Legacy Standby and suspend modes can be set.
APM (Default) Advanced power management (APM) is activated
ACPI Advanced Configuration and Power Interface (ACPI) is
activated.
x Standby Mode [Disabled]
The Standby Mode option can only be selected if the Power Management option is set
to Legacy. The Standby Mode specifies the amount of time the system can be inactive
before the system enters standby mode. The Standby Mode options are:
Disabled (Default)
1 Sec
5 Sec
10 Sec
15 Sec
30 Sec
45 Sec
1 Min
5 Min
10 Min
15 Min
Page 146