IEI Integration NANO-LX v1.10 - Manual (Page 93)

NANO-LX EPIC SBC
Step 4: Open the SO-DIMM socket arms. Gently pull the arms of the SO-DIMM socket
out and push the rear of the SO-DIMM down. (See Figure 5-1)
Step 5: Secure the SO-DIMM. Release the arms on the SO-DIMM socket. They clip into
place and secure the SO-DIMM in the socket. Step 0:
5.5 CF Card Installation
NOTE:
The NANO-LX supports CF Type II card. For the complete
specifications of the supported CF cards please refer to Chapter 2.
To install the a CF Type II card onto the NANO-LX, please follow the steps below:
Step 1: Locate the CF card socket. Place the NANO-LX on an anti-static pad with the
solder side facing up. Locate the CF card.
Step 2: Align the CF card. Make sure the CF card is properly aligned with the CF
socket.
Step 3: Insert the CF card. Gently insert the CF card into the socket making sure the
socket pins are properly inserted into the socket. See Figure 5-2. Step 0:
Page 93