IEI Integration NANO-LX v1.10 - Manual (Page 68)

NANO-LX EPIC SBC
NOTE:
The supplied voltage can be selected via JP7.
Figure 4-17: CN23 Connector Location
4.2.16 Parallel Port Connector
CN Label: CN20
CN Type: 26-pin header (2x13 pins)
CN Pinouts: See Table 4-19
CN Location: See Figure 4-18
The parallel port connector connects to a printer. The NANO-LX comes with a multi-mode
(ECP/EPP/SPP) parallel port. The CN20 parallel port interface features a 26-pin flat-cable
connector that requires an adapter cable if a traditional DB-25 connector is preferred. The
parallel interface can be re-assigned to LPT2 or LPT3 through the BIOS configuration
utility. The default interrupt channel is IRQ7. Select ECP or EPP DMA mode using the
BIOS configuration utility.
Page 68