IEI Integration NANO-9452 v4.02 - Manual (Page 133)

NANO-9452 EPIC Motherboard
Page 115
 Restore on AC Power Loss [Power Off]
Use the Restore on AC Power Loss BIOS option to specify what state the system
returns to if there is a sudden loss of power to the system.

Power Off The system remains turned off

Power On (Default) The system turns on

Last State The system returns to its previous state. If it was on, it
turns itself on. If it was off, it remains off.
 Power Button Mode [On/Off]
Use the Power Button Mode BIOS to specify how the power button functions.

On/Off (Default) When the power button is pressed the system is either
turned on or off

Suspend When the power button is pressed the system goes into
suspend mode
 Resume on Ring [Disabled]
Use the Resume on Ring BIOS option to enable activity on the RI (ring in) modem line to
rouse the system from a suspend or standby state. That is, the system will be roused by
an incoming call on a modem.

Disabled (Default) Wake event not generated by an incoming call

Enabled Wake event generated by an incoming call
 Resume on PME# [Disabled]
Use the Resume on PME# BIOS option to enable activity on the PCI PME (power
management event) controller to rouse the system from a suspend or standby state.

Disabled (Default) Wake event not generated by PCI PME controller
activity

Enabled Wake event generated by PCI PME controller activity