IEI Integration NANO-9452 v4.02 - Manual (Page 96)

NANO-9452 EPIC Motherboard
Page 78
Figure 5-12: COM 2 Function Select Jumper Location
5.4.5 LVDS Voltage Selection
WARNING:
Permanent damage to the screen and NANO-9452 may occur if the
wrong voltage is selected with this jumper. Please refer to the user
guide that cam with the monitor to select the correct voltage.
Jumper Label: J_LVDS1
Jumper Type: 3-pin header
Jumper Settings: See Table 5-6
Jumper Location: See Figure 5-13
The LVDS Voltage Selection jumper allows the LVDS screen voltage to be set. The
LVDS Voltage Selection jumper settings are shown in Table 5-6.
AT Power Select Description
Short 1-2 +3.3V LVDS Default
Short 2-3 +5V LVDS
Table 5-6: LVDS Voltage Selection Jumper Settings
The LVDS Voltage Selection jumper location is shown in Figure 5-13.