IEI Integration NANO-9452 v4.02 - Manual (Page 93)

NANO-9452 EPIC Motherboard
Page 75
Figure 5-9: CF Card Setup Jumper Location
5.4.2 CF Card Setup
Jumper Label: JCF1
Jumper Type: 2-pin header
Jumper Settings: See Table 5-3
Jumper Location: See Figure 5-10
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave
device or the master device. CF Card Setup jumper settings are shown in Table 5-3.
AT Power Select Description
Open Slave Default
Closed Master
Table 5-3: CF Card Setup Jumper Settings
The CF Card Setup jumper location is shown in Figure 5-10.
Figure 5-10: CF Card Setup Jumper Location