IEI Integration NANO-9452 v4.02 - Manual (Page 150)

NANO-9452 EPIC Motherboard
Page 132
 AddOn ROM Display Mode [Force BIOS]
Use the AddOn ROM Display Mode option to allow add-on ROM (read-only memory)
messages to be displayed.

Force BIOS D EFAULT The system forces third party BIOS to display
during system boot.

Keep Current The system displays normal information during
system boot.
 Bootup Num-Lock [On]
Use the Bootup Num-Lock BIOS option to specify if the number lock setting must be
modified during boot up.

Off Does not enable the keyboard Number Lock automatically. To
use the 10-keys on the keyboard, press the Number Lock key
located on the upper left-hand corner of the 10-key pad. The
Number Lock LED on the keyboard lights up when the Number
Lock is engaged.

On D EFAULT Allows the Number Lock on the keyboard to be enabled
automatically when the computer system boots up. This allows
the immediate use of the 10-key numeric keypad located on
the right side of the keyboard. To confirm this, the Number
Lock LED light on the keyboard is lit.
 PS/2 Mouse Support [Enabled]
Use the PS/2 Mouse Support option adjusts PS/2 mouse support capabilities.

Disabled PS/2 mouse support is disabled and prevented from
using system resources.

Enabled D EFAULT Allows the system to use a PS/2 mouse.

Auto The system auto-adjusts PS/2 mouse support.