IEI Integration NANO-9452 v4.02 - Manual (Page 90)

NANO-9452 EPIC Motherboard
Page 72
5.3.4 CF Card Installation
NOTE:
The NANO-9452 can support both CF Type I cards and CF Type II
cards. For the complete specifications of the supported CF cards
please refer to Chapter 2.
To install the CF card (Type 1 or Type 2) onto the NANO-9452, please follow the steps
below:
Step 1: Locate the CF card socket. Place the NANO-9452 on an anti-static pad with
the solder side facing up. Locate the CF card.
Step 2: Align the CF card. Make sure the CF card is properly aligned with the CF
socket.
Step 3: Insert the CF card. Gently insert the CF card into the socket making sure the
socket pins are properly inserted into the socket. See Figure 5-7. Step 0: