B.3 setup procedure for linux, Etup, Rocedure for – IEI Integration NANO-PV-D4252_N4552_D5252 User Manual
Page 129: Inux, Figure b-17: image creation complete, Figure b-18: press any key to continue
NANO-PV-D4252/N4552/D5252 EPIC SBC
Page 115
Step 11:
When the image creation completes, a screen prompts as shown in Figure B-17.
Click Continue and close the Ghost window to exit the program.
Figure B-17: Image Creation Complete
Step 12:
The recovery tool main menu window is shown as below. Press any key to
reboot the system.
S
te
p
0
:
Figure B-18: Press Any Key to Continue
B.3 Setup Procedure for Linux
The initial setup procedures for Linux system are mostly the same with the procedure for
Microsoft Windows. Please follow the steps below to setup recovery tool for Linux OS.
Step 1:
Hardware and BIOS setup. Refer to Section B.2.1.
Step 2:
Install Linux operating system. Make sure to install GRUB (v0.97 or earlier)
MBR type and Ext3 partition type. Leave enough space on the hard drive to
create the recover partition later.