IEI Integration NANO-PV-D4252_N4552_D5252 - Manual (Page 65)

NANO-PV-D4252/N4552/D5252 EPIC SBC
Page 51
Figure 4-7: COM 3 RS-422 and RS-485 Termination Select Jumper
Location
4.5.7 CompactFlash® Card Setup
Jumper Label: JCF1
Jumper Type: 2-pin header
Jumper Settings: See Table 4-9
Jumper Location: See Figure 4-4
The CompactFlash® slot is connected through an IDE connection. This jumper sets the
CompactFlash® card as the master or slave IDE device.
Setting Description
Open Slave
Closed Master
Table 4-9: CompactFlash® Setup Jumper Settings
Figure 4-8: CompactFlash® Setup Jumper Location