IEI Integration NANO-PV-D4252_N4552_D5252 - Manual (Page 75)

NANO-PV-D4252/N4552/D5252 EPIC SBC
Page 61
The following external peripheral devices can be connected to the external peripheral
interface connectors.
 Keyboard and mouse
 RJ-45 Ethernet cable connector
 Serial devices
 USB devices
 VGA monitor
To install these devices, connect the corresponding cable connector from the actual
device to the corresponding NANO-PV-D4252/N4552/D5252 external peripheral interface
connector making sure the pins are properly aligned.
4.8.1 LAN Connection (Single Connector)
There is one external RJ-45 LAN connector. The RJ-45 connector enables connection to
an external network. To connect a LAN cable with an RJ-45 connector, please follow the
instructions below.
Step 1: Locate the RJ-45 connectors. The location of the LAN connector is shown in
Chapter 4.
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the NANO-PV-D4252/N4552/D5252. See Figure 4-18.