2 ps/2 y-cable connection, Figure 4-18: lan connection – IEI Integration NANO-PV-D4252_N4552_D5252 User Manual

Page 76

Advertising

NANO-PV-D4252/N4552/D5252 EPIC SBC

Page 62

Figure 4-18: LAN Connection

Step 3:

Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN

cable RJ-45 connector into the on-board RJ-45 connector.

Step 0:

4.8.2 PS/2 Y-Cable Connection

The NANO-PV-D4252/N4552/D5252 has a PS/2 connector on the external peripheral

interface panel. The dual PS/2 connector is connected to the PS/2 Y-cable that came with

the NANO-PV-D4252/N4552/D5252. One of the PS/2 cables is connected to a keyboard

and the other to a mouse to the system. Follow the steps below to connect a keyboard and

mouse to the NANO-PV-D4252/N4552/D5252.

Step 1:

Locate the dual PS/2 connector. The location of the PS/2 connector is shown

in Chapter 3.

Step 2:

Insert the keyboard/mouse connector.

Insert the PS/2 connector on the end

of the PS/2 y-cable into the external PS/2 connector. See Figure 4-19.

Advertising