5 vga monitor connection, Figure 4-21: usb connector, Table 4-4 – IEI Integration NANO-PV-D4252_N4552_D5252 User Manual
Page 79: Jumper location
NANO-PV-D4252/N4552/D5252 EPIC SBC
Page 65
Figure 4-21: USB Connector
4.8.5 VGA Monitor Connection
The NANO-PV-D4252/N4552/D5252 has a single female DB-15 connector on the external
peripheral interface panel. The DB-15 connector is connected to a CRT or VGA monitor.
To connect a monitor to the NANO-PV-D4252/N4552/D5252, please follow the
instructions below.
Step 1:
Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
Step 2:
Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Step 3:
Insert the VGA connector
.
Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
NANO-PV-D4252/N4552/D5252. See Figure 4-22.