Figure 4-14: power cable to motherboard connection – IEI Integration NANO-PV-D4252_N4552_D5252 User Manual
Page 71
Advertising
NANO-PV-D4252/N4552/D5252 EPIC SBC
Page 57
Step 1:
Locate the power cable. The power cable is shown in the packing list in
Chapter 3.
Step 2:
Connect the Power Cable to the Motherboard. Connect the 4-pin (2x2) Molex
type power cable connector to the AT/ATX power connector on the motherboard.
See Figure 4-14.
Figure 4-14: Power Cable to Motherboard Connection
Step 3:
Connect Power Cable to Power Supply. Connect one of the 4-pin (1x4) Molex
type power cable connectors to an AT/ATX power supply. See Figure 4-15.
Step 0:
Advertising