IEI Integration NANO-QM871 - Manual (Page 122)

NANO-QM871 EPIC SBC
Page 107
Detect Non-Compliance Device [Disabled]
Use the Detect Non-Compliance Device option to enable or disable the “detect
no-compliance PCIe device” function.
Disabled D EFAULT Detect no-compliance PCIe device function is disabled
Enabled Detect no-compliance PCIe device function is enabled. If
will take more time at POST if it is enabled.
5.5 Boot
Use the Boot menu (BIOS Menu 26) to configure system boot options.
Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit
Boot Configuration
Bootup NumLock State [On]
Quiet Boot [Enabled]
Option ROM Messages [Force BIOS]
Launch PXE OpROM [Disabled]
UEFI Boot [Disabled]
Boot Option Priorities
Select the keyboard
NumLock state
---------------------
: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General
Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
BIOS Menu 26: Boot
Bootup NumLock State [On]
Use the Bootup NumLock State BIOS option to specify if the number lock setting must
be modified during boot up.