IEI Integration NANO-QM871 - Manual (Page 83)

NANO-QM871 EPIC SBC
Page 68
Figure 4-18: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector. Step 0:
4.9.3 USB Connection (Dual Connector)
The external USB 2.0/3.0 connectors provide easier and quicker access to external USB
devices. Follow the steps below to connect USB devices to the NANO-QM871.
Step 1: Locate the USB 2.0/3.0 connectors. The locations of the USB 2.0/3.0
connectors are shown in Chapter 3.
Step 2: Insert a USB 2.0/3.0 plug. Insert the USB 2.0/3.0 plug of a device into the
USB 2.0/3.0 on the external peripheral interface. See Figure 4-19.