IEI Integration NANO-QM871 - Manual (Page 58)

NANO-QM871 EPIC SBC
Page 43
3.3 External Interface Connectors
The NANO-QM871 on-board external interface connectors are shown in Figure 3-28.
Figure 3-28: External Interface Connectors
3.3.1 Ethernet Connectors
CN Label: LAN1, LAN2
CN Type: RJ-45 connector
CN Location: See Figure 3-28
CN Pinouts: See Table 3-29
The NANO-QM871 is equipped with two built-in RJ-45 Ethernet controllers. Each
controller can connect to the LAN through one RJ-45 LAN connector.
PIN DESCRIPTION PIN DESCRIPTION
1 MDIA0+ 5 MDIA2-
2 MDIA0- 6 MDIA1-
3 MDIA1+ 7 MDIA3+
4 MDIA2+ 8 MDIA3-
Table 3-29: LAN Pinouts
Figure 3-29: Ethernet Connector