IEI Integration WAFER-LX v1.0 User Manual
Page 101
WAFER-LX User Manual
through the network via a PCI card
Enabled
(D
EFAULT
)
The system can be woken from a suspend state
through the network via a PCI card
Power On by Ring [Enabled]
The Power On by Ring option allows users to determine whether or not the system can be roused
from a suspend state when the modem rings.
Disabled
The system will not be woken from a suspend state
when the modem rings
Enabled
(D
EFAULT
)
The system will be woken from a suspend state
when the modem rings
USB KB Wake-Up From S3 [Disabled]
If you selected either the S3(STR) or the S1&S3 option in the ACPI Suspend Type option, you will
be able to configure the USB KB Wake-Up From S3. This option allows you to wake the system
from an S3 suspend state using the keyboard.
Disabled
(D
EFAULT
)
Keyboard cannot be used to rouse the system from
the S3 suspend state
Enabled
Keyboard can be used to rouse the system from the
S3 suspend state
Resume by Alarm [Disabled]
The Resume by Alarm option allows you tell the computer when it should be roused
from a suspend state.
Disabled
(D
EFAULT
)
No time is specified for when the computer should
be roused from a suspend state
Enabled
The date and time the computer must be roused
from a suspend state is specified
x Date(of Month) Alarm [0]
The Date(of Month) Alarm option can only be configured if the Resume by Alarm option has
been enabled. When you select this option you will be asked to enter a number between 0 and 31
to specify the date of the current month that you would like the system to be roused.
4-36
IEI
®
Technology, Corp.
4-36