IEI Integration WAFER-LX v1.0 User Manual
Page 29
Advertising
WAFER-LX User Manual
NOTE:
1. The configuration options through jumper settings will be discussed
in Chapter 3: Installation.
2.
On the solder side, there are a CFII card socket and a FPC floppy
connector.
Shown below is a diagram indicating the locations of configuration jumpers.
Figure 2-4 Locations of Configuration Jumpers
NOTE:
1. Only configuration jumpers are shown in the diagram above.
2.
For more configuration details on jumper settings, please refer to
Chapter 3 Installation.
2-8
2-8
IEI
®
Technology, Corp.
Advertising