IEI Integration WAFER-LX v1.0 - Manual (Page 130)

WAFER-LX User Manual
Step 3. You should then be prompted by a “Create RAID0(Y/N)” confirm box.
Step 4. Press Y and then some necessary information will be written to the selected
disk drives.
WARNING!
All data previously stored on the member drives of a RAID configuration will
be destroyed during the RAID initialization process. If you use “used” drives
to create a RAID array, make you have moved or backed up your data before
creating a RAID array out of these disk drives.
Step 5. Next you will be prompted to enter a nickname for the created array.
Upper and lower case alphabetic, numeric, space, and underscore
characters are all applicable for naming an array.
Step 6. Once an array is successfully created, it will be listed in the list of the
configured arrays.
C-8 IEI ® Technology, Corp. C-8