IEI Integration WAFER-LX v1.0 - Manual (Page 98)

WAFER-LX
Standby Mode
Defines the continuous idle time before the system enters Standby Mode. If any item defined is
enabled & active Standby timer will be reloaded. The standby mode turns screen and hard drives
off
Suspend Mode
Defines the timeout before the system enters the Suspend Mode. The suspend mode powers
down the system and keeps a trickle of power. If an interrupt to RTC reaches, the system wakes
up.
Video Off In Suspend [Yes]
The Video Off In Suspend option allows you to specify whether the display monitor is turned off
or remains on when the systems enters a suspend state.
No The display monitor will remain on when the system is in
suspend mode.
Yes (D EFAULT ) The display monitor will be turned off when the system is in
suspend mode.
Suspend Type [Stop Grant]
The Suspend Type option allows you to determine what suspend state the CPU will go into when
the system is in the suspend state.
Stop Grant (D EFAULT ) When the CPU is in the stop grant state the bus
clock (BCLK) continues to run. Snoops and
interrupts are also allowed in the stop grant state.
Thus, the CPU can operate in a lower power state
yet can respond to snoops and interrupts.
PwrON Suspend
4-33 4-33