IEI Integration WAFER-LX v1.0 - Manual (Page 129)

WAFER-LX
1. RAID BIOS Setup Menu:
The Serial ATA RAID volume may be configured using the RAID Configuration utility stored
within the ALi RAID controller ROM. The BIOS configuration screen is divided into three
major functional areas: Main Functional Menu, Drive Selection Menu, and a list for the
configured RAID arrays.
2. RAID Options:
2.1 Create RAID0 Striping for Performance
Step 1. To create a RAID0 array, use your arrow keys to highlight and press Enter to
activate this item. An ‘S’ flashing character will appear at the Drive
Selection Menu where you can choose the member drives to be included in
the RAID0 array.
Step 2. Use the Space key to select members of the RAID0 RAID configuration.
The flashing cursor should change to a lower case ‘s’ character once any of
the connected disk drives has been selected. Follow the same method to
select another member drive.
C-7 C-7