Pnp/pci configurations – IEI Integration WAFER-LX v1.0 User Manual
Page 109
Advertising

WAFER-LX User Manual
PnP/PCI Configurations
The PnP/PCI Configurations menu (BIOS Menu 9) allows you to set the plug and play, and PCI
options.
BIOS Menu 14: PnP/PCI Configurations
Init Display First [PCI Slot]
The Init Display First option allows you to determine what display device to boot with.
PCI Slot
(D
EFAULT
)
The system will boot using the PCI graphic card
Onboard
The system will boot using the preinstalled onboard graphics
device
Reset Configuration Data [Disabled]
The Reset Configuration Data option allows you to reset the Extended System Configuration
Data (ESCD) when you exit setup if you have problems booting the system up after you have
installed a new add-on.
4-44
IEI
®
Technology, Corp.
4-44
Advertising