IEI Integration TANK-600-D2550_N2600 - Manual (Page 125)

TANK-600 Em b e d d e d S ys te m
P a g e 114
B.1 S a fe ty P re c a u tio n s
WARNING:
The precautions outlined in this appendix should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the TANK-600.
Please follow the safety precautions outlined in the sections that follow:
B.1.1 Ge n e ra l S a fe ty P re c a u tio n s
Please ensure the following safety precautions are adhered to at all times.
 Make sure the power is turned off and the power cord is disconnected
when moving, installing or modifying the system.
 Do not apply voltage levels that exceed the specified voltage range.
Doing so may cause fire and/or an electrical shock.
 Electric shocks can occur if opened while still powered on.
 Do not drop or insert any objects into the ventilation openings.
 If considerable amounts of dust, water, or fluids enter the system, turn
off the power supply immediately, unplug the power cord, and contact the
system vendor.
 DO NOT:
o Drop the system against a hard surface.
o In a site where the ambient temperature exceeds the rated temperature
B.1.2 An ti-s ta tic P re c a u tio n s
WARNING:
Failure to take ESD precautions during the installation of the TANK-600
may result in permanent damage to the TANK-600 and severe injury to
the user.