IEI Integration TANK-600-D2550_N2600 - Manual (Page 67)

TANK-600 Em b e d d e d S ys te m
P a g e 56

Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.

IO=280h;
IRQ=10
Serial Port I/O port address is 280h and the interrupt
address is IRQ10

IO=280h;
IRQ=10, 11
Serial Port I/O port address is 280h and the interrupt
address is IRQ10, 11

IO=288h;
IRQ=10, 11
Serial Port I/O port address is 288h and the interrupt
address is IRQ10, 11
5.3.7.1.6 S e ria l P o rt 6 Co n fig u ra tio n
 Serial Po rt [En ab led ]
Use the Serial Port option to enable or disable the serial port.

Disabled Disable the serial port

Enabled D EFAULT Enable the serial port
 Ch an g e S ettin g s [Au to ]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.

IO=2D8h;
IRQ=10
Serial Port I/O port address is 2D8h and the interrupt
address is IRQ10

IO=2C0h;
IRQ=10, 11
Serial Port I/O port address is 2C0h and the interrupt
address is IRQ10, 11

IO=2C8h;
IRQ=10, 11
Serial Port I/O port address is 2C8h and the interrupt
address is IRQ10, 11

IO=2D0h;
IRQ=10, 11
Serial Port I/O port address is 2D0h and the interrupt
address is IRQ10, 11