IEI Integration TANK-600-D2550_N2600 - Manual (Page 33)

TANK-600 Em b e d d e d S ys te m
P a g e 22
3.8.2 LAN Co n n e c tio n
There are two external RJ-45 LAN connectors on the TANK-600. The RJ-45 connector
enables connection to an external network. To connect a LAN cable with an RJ-45
connector, please follow the instructions below.
S te p 1: Locate the RJ-45 connectors. The location of the LAN connector is shown in
Chapter 1.
S te p 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the TANK-600. See Figure 3-12.
Figure 3-12: LAN Connection
S te p 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the external interface.
3.8.3 S e ria l De vic e Co n n e c tio n
There are six RS-232 connectors via DB-9, two RS-232/422/485 connectors via DB-9 and
eight RS-232 connectors via DB-78 (optional) for serial device connection. Follow the
steps below to connect a serial device to the TANK-600.