IEI Integration TANK-600-D2550_N2600 - Manual (Page 36)

TANK-600 Em b e d d e d S ys te m
P a g e 25
Figure 3-15: USB Device Connection
S te p 3: Insert the device connector. Once aligned, gently insert the USB device
connector into the onboard connector. S te p 0:
3.8.5 VGA Mo n ito r Co n n e c tio n
The TANK-600 has a single female DB-15 connector on the external peripheral interface
panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor
to the TANK-600, please follow the instructions below.
S te p 1: Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 1.
S te p 2: Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
S te p 3: Insert the VGA connector. Once the connectors are properly aligned with the
insert the male connector from the VGA screen into the female connector on the
TANK-600. See Figure 3-16.