IEI Integration TANK-600-D2550_N2600 - Manual (Page 27)

TANK-600 Em b e d d e d S ys te m
P a g e 16
Figure 3-5: Inserting the HDD
S te p 8: Install the HDD bracket in the same position it was before and fasten the HDD
bracket retention screws.
S te p 9: Reinstall the bottom cover.
3.3 Mo u n tin g th e S ys te m with Mo u n tin g Bra c ke ts
To mount the embedded system onto a wall or some other surface using the two mounting
brackets, please follow the steps below.
S te p 1: Turn the embedded system to the bottom panel.
S te p 2: Align the two retention screw holes in each bracket with the corresponding
retention screw holes on the bottom panel (Figure 3-6).