IEI Integration TANK-800-D525 v1.14 - Manual (Page 38)

TANK-800 Embedded System
Page 26
3.6 Mounting the System with Mounting Brackets
To mount the embedded system onto a wall or some other surface using the two mounting
brackets, please follow the steps below.
Step 1: Turn the embedded system over or to the left side panel.
Step 2: Align the two retention screw holes in each bracket with the corresponding
retention screw holes on the bottom surface or the left side panel (Figure 3-14).
Bottom Surface
Left Side Panel
Figure 3-14: Mounting Bracket Retention Screws