Figure 3-26: serial device connector, Figure 3-27: serial port pinout location, Table 3-7: serial port pinouts – IEI Integration TANK-800-D525 v1.14 User Manual
Page 48: See table 3-7 and figure 3-27, Figure 3-26
Advertising
TANK-800 Embedded System
Page 36
Figure 3-26: Serial Device Connector
Step 3:
Secure the connector
. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector.
Pin Description
Pin Description
1 DCD
6 DSR
2 RX
7 RTS
3 TX
8 CTS
4 DTR
9 RI
5 GND
Table 3-7: Serial Port Pinouts
Figure 3-27: Serial Port Pinout Location
Advertising