IEI Integration PPC-WIDS-51xxA-G41 - Manual (Page 124)

PPC-51xxA-G41/WIDS-51xA-G41 Panel PC
Page 112
Step 4: Unfasten the internal elevated platform screws (Figure 6-5).
Figure 6-5: Internal Elevated Platform Screws
Step 5: Slide the elevated platform out of the chassis. Step 0:
6.6 PSU Module Replacement
Please read the warnings at the beginning of Section 4.3 before attempting to access any
PPC-51xxA-G41/WIDS-51xA-G41 internal components.
If the PSU module has been damaged it must be replaced. To replace the PSU module,
please follow the steps below.
6.6.1 Remove the Old PSU
Step 1: Remove the back cover (Section 4.4).
Step 2: Detach and remove the elevated platform (Section 6.5).