IEI Integration PPC-WIDS-51xxA-G41 - Manual (Page 61)

PPC-51xxA-G41/WIDS-51xA-G41 Panel PC
Page 49
4.7 PCI Expansion Card Installation (Optional)
To install a PCI expansion card, please do the following.
Step 1: Remove the back panel. See Section 4.4.
Step 2: Install the PCI riser card. Insert the PCI riser card into the PCI slot on the
motherboard of the system. Secure the PCI riser card to the system with two
retention screws.
Figure 4-18: Secure the PCI Riser Card
Step 3: Remove the expansion slot cover. The expansion slot on the I/O panel
interface is secured to the system with a single retention screw. Remove the
screw.